Register

Date: 10/24/2014

Location: Mesa, Arizona, 85202, United States

This Fall We Will Have A Lot Of New Builds Hitting The Track And Half Mile. Excited To See What All Of These Cars Do. Meanwhile @joe_Vero Is Over Here Ready To Put Some Cars On The Chopin Block At @streetcartakeover In Oct! He's Gone A Best Of 8.6, Let's Media byCordesPerformance21 minutes ago
(0) (0)
Media byCordesPerformance1 day ago
(0) (0)
@_Joshua_Az_ Monster Zl1 We Built For Him. Featuring A Lot Of Cpr In House Made Products. Cpr 5" Cold Air Intake Cpr 2.5 Gallon Front Bumper Expansion/ice Tank Cpr Low Side Fuel System It Also Has A @kongperform Cnc Ported Blower, @latemodelengin Media byCordesPerformance1 day ago
(0) (0)
Fab Is All Done On Drew's Monster Ta We Have Been Building Him From The Ground Up. Everything Is Off To Coaters Mon And We Are On The Home Stretch With This Thing! Media byCordesPerformance1 day ago
(0) (0)
V2 We Previously Did Full Bolt On's Too Back For One Of Our Cam Grinds, Lower Pulley, Fuel System, And Flex. Http://www.facebook.com/cordesperformanceracing Http://www.cordesracing.com Media byCordesPerformance1 day ago
(0) (0)
Media byCordesPerformance1 day ago
(0) (0)
About To See Some Wicked New Stuff For The Shop C5 Very Soon Media byCordesPerformance3 days ago
(0) (0)
Wall Pictures Media byCordesPerformance3 days ago
(0) (0)
The Turbo Ss Sedan We Built Was Delivered Last Night, Seeing The Customers Reaction After Taking That First Drive Was Absolutely Priceless! Thank You Devin For Trusting Us To Build What Is Absolutely An Amazing Street Car. Media byCordesPerformance3 days ago
(0) (0)
This V2 About To Hit The Dyno With The Following Setup We Just Did. New Era Intake, Griptec 2.55, Id 1050X, Cpr Reinforced Brick, Cpr Expansion Tank, Ngk Plugs. Same Day Service And A Nice Bump In Power! Http://www.facebook.com/cordesperformanceracing Htt Media byCordesPerformance3 days ago
(0) (0)
The Z From Wyoming In Process Of Getting His Heads, Cam, Msd Setup Installed. We Are Also Doing An Rps Clutch, Walbro 450 Pump, Flex Fuel Kit And Injectors. This Is Not Our Heads/cam Setup, But That's Ok We Are Curious To See How It Does! Http://www.faceb Media byCordesPerformance3 days ago
(0) (0)
One Of Our V2 Coupe Trunk Tanks About To Head Out The Door. This Tank Is Specifically Made To Fit In A Coupe And Be Flush With The Carpet To Offer A Clean Look And Install. We Sell This As A Tank Only Or A Complete System With A Rear Pump, Plug And Play W Media byCordesPerformance4 days ago
(0) (0)
The Next Episode Is Up! Check Out The Turbo Ss Sedan Hit The Dyno And Mario Mikha Do A Burnout In His R6 Swapped Quad. Make Sure To Hit That Subscribe Button As We Are Getting Closer And Closer To Our Goal :) Https://bit.ly/2Krkubk Media byCordesPerformance5 days ago
(0) (0)
Media byCordesPerformance5 days ago
(0) (0)
Media byCordesPerformance6 days ago
(0) (0)
Media byCordesPerformance6 days ago
(0) (0)
Z In From Wyoming Getting A Baseline Done Before We Do A Full Heads, Cam Setup On It. Http://www.facebook.com/cordesperformanceracing Http://www.cordesracing.com Media byCordesPerformance6 days ago
(0) (0)
Who's Excited For The Return Of @omegamotorsport To Kick Off The Fall In Az!? This Will Be A One Day Event. We Will Have A Fleet Of Cpr Built Cars Out So If You're New To This Or Want To Compare Yours Against One Of Our Packages That You're Looking To Do Media byCordesPerformance6 days ago
(0) (0)
This Forged Lt4 About To Head Out The Door, It's Getting A Magnuson Blower On Top And Going Into A 67 Pro Touring Vette. Includes One Ported Heads, Cpr Spec Cam, Cpr Valve Covers, Cpr Dod Delete Valley Plate. Http://www.facebook.com/cordesperformanceracin Media byCordesPerformance6 days ago
(0) (0)
C5Z In For A Nice Oil Cooler Setup And Some Routine Maintenance. We Don't Just Do Insane Builds Here, Even The Little Jobs We Love! Http://www.facebook.com/cordesperformanceracing Http://www.cordesracing.com Media byCordesPerformance6 days ago
(0) (0)
New Episode Alert! It's Here, Watch To Stay Up To Date On What's Going On In The Shop And Hit That Subscribe Button! So Close To 1100 And Than It's Header Time For The Escalade Media byCordesPerformance6 days ago
(0) (0)
@_Joshua_Az_ Zl1 Getting The Everything Package. Showing Off His @latemodelengines Cnc Ported Lt4 Heads And Our Ltx Valley Cover. Http://www.facebook.com/cordesperformanceracing Http://www.cordesracing.com Media byCordesPerformance6 days ago
(0) (0)
Media byCordesPerformance6 days ago
(0) (0)
Rob's 800+ Rwhp V3 We Built For Him Looking Amazing On His Weld Setup. This Car Has Turned Out Absolutely Amazing! Media byCordesPerformance6 days ago
(0) (0)